Skip to main content

How can we help you?

Druva Documentation

Download and Install inSync Connector

Before you download and install inSync Connector, ensure you meet the following pre-requisites.

Pre-requisites

Hardware Prerequisites 

The following table lists the hardware prerequisites to install inSync Connector.

The connector's footprint is very low, which means that almost any hardware can support the Connector.

Hardware Minimum Requirements
CPU 1 GHz or faster
RAM 2 GB
Disk Space 16 GB

Software Prerequisites

The following table lists the software prerequisites to install inSync Connector.

Software Minimum Requirements
Operating system

Windows

  • Windows Server 2008 R2 (64-bit)
  • Windows Server 2012 R2 (64-bit)
  • Windows Server 2016 (64-bit)
  • Windows Server 2019 (64-bit)

Note: If you have installed the previous version of the inSync Connector (see EOL Policy) on a 32-bit Windows computer, you cannot upgrade your inSync Connector. You must install and configure the latest inSync Connector. 

Port UsageEdit section

The following table lists the ports that the inSync Connector uses.

Port Number Used By
443, 6061, 80

inSync Connector with inSync Cloud

Note: If you want to use port 443 for the inSync Connector, contact Druva Support.

389 LDAP
3268    LDAP on global catalog
636    Secure LDAP
3269    Secure LDAP on global catalog

Download inSync Connector

To download the latest version of inSync Connector,

  1. Open a browser on the computer where you want to install inSync Connector.
  2. Log on to inSync Management Console.
  3. On the inSync Management Console menu bar, click  > Downloads.
  4. Select AD/LDAP Connector from the list and click Download.

Install inSync Connector

To install inSync Connector,

  1. Double-click the installer. The installation wizard appears.
  2. Enter the appropriate information on the wizard and complete the installation procedure.

The inSync Connector is installed. You can now configure the connector. For more information, see Configure the inSync Connector.

Upgrade inSync Connector

To upgrade inSync Connector

  1. Open a browser on the computer where you have the inSync Connector installed.
  2. Log on to inSync Management Console.
  3. On the inSync Management Console menu bar, click  > inSync Settings.
  4. Click the Connectors tab.
  5. In the Connectors area, click the Download and install Connector link. 
  6. After you download the inSync Connector installer, double-click the installer. The installation wizard appears.
  7. Enter the appropriate information on the wizard and complete the upgrade procedure.

The inSync Connector is upgraded and functional. You do not need to reconfigure the inSync Connector.

  • Was this article helpful?