Install or upgrade AD/LDAP Connector
Overview
To enable communication between your AD/LDAP and inSync, you must establish a secured connection between your AD/LDAP and inSync Master using the AD/LDAP Connector. inSync uses the AD/LDAP Connector only while authenticating and activating inSync Clients. Backups and restores from the end-user devices on which inSync Client is activated will work as usual even if the computer where you installed the AD/LDAP Connector is not available. This means that you do not need to ensure high availability (HA) for the AD/LDAP Connector.
To learn more, see About AD/LDAP Connector.
Install AD/LDAP Connector
Hardware Prerequisites
The following table lists the hardware prerequisites to install AD/LDAP Connector. The AD/LDAP Connector footprint is very low, which means that almost any hardware can support the AD/LDAP Connector.
Hardware | Minimum Requirements |
---|---|
CPU | 1 GHz or faster |
RAM | 2 GB |
Disk Space | 16 GB |
Software Prerequisites
The following table lists the software prerequisites to install AD/LDAP Connector.
Software | Minimum Requirements |
---|---|
Operating system |
Windows
|
Note: If you have installed the previous version of the AD/LDAP Connector on a 32-bit Windows computer, you cannot upgrade your AD/LDAP Connector. You must install and configure the latest AD/LDAP Connector.
Download Link
Download the latest AD/LDAP Connector.
Note: You can use AD/LDAP Connector to add and manage new users. You cannot use AD/LDAP Connector to manage existing users on inSync Cloud. Existing users will continue to use their inSync Cloud credentials and you have to manage these users manually.
Install AD/LDAP Connector
To install AD/LDAP Connector,
- Double-click the installer. The installation wizard appears.
- Enter the appropriate information on the wizard and complete the installation procedure.
Upgrade AD/LDAP Connector
To upgrade AD/LDAP Connector,
- On the computer where you want to upgrade the AD/LDAP Connector and download the latest AD/LDAP Connector installer.
- Double-click the installer. The installation wizard appears.
- Enter the appropriate information on the wizard and complete the upgrade procedure.
The AD/LDAP Connector is upgraded and functional. You do not need to reconfigure the AD/LDAP Connector.