The following table lists the hardware prerequisites to install inSync Master.
|CPU||64-bit, quad core processor|
|RAM||8 GB RAM for up to 1 TB of storage.
If you have storage above 1 TB, we recommend that you add 1 GB RAM per additional TB of storage.
Disk space required for logs
|1,000 Devices||5,000 Devices||10,000 Devices||25,000 Devices||50,000 Devices||100,000 Devices|
|175 GB||275 GB||400 GB||600 GB||900 GB||1500 GB|
Note: The Hardware prerequisites table lists approximate numbers, which are dependent on various factors. To know the exact hardware prerequisites for your enterprise, contact Druva Support.
The following table lists the software prerequisites to install inSync Master.
The following table lists the other requirements to install inSync Master.
|Open port numbers||
This port is used to communicate with the inSync Master. By default, inSync Master uses port 443 for accessing the inSync Master Management Console and inSync Web. The inSync Master also uses this as the backup port. It is required for backups.
Note: Ensure that this port remains free. If you choose to configure ports other than the default ports, ensure that those ports remain free.
|IP address or FQDN||The WAN IP address or FQDN for backing up data over WAN. You can configure the IP address by using the inSync Master Management Console.|