The following table lists the hardware prerequisites to install inSync Master.
|CPU||64-bit, quad core processor|
|RAM||8 GB RAM for up to 1 TB of storage. |
If you have storage above 1 TB, we recommend that you add 1 GB RAM
per additional TB of storage.
Disk space required for logs
|1,000 Users||5,000 Users||10,000 Users||25,000 Users||50,000 Users||100,000 Users|
|175 GB||275 GB||400 GB||600 GB||900 GB||1500 GB|
Note: The Hardware prerequisites table lists approximate numbers, which are dependent on various factors. To know the exact hardware prerequisites for your enterprise, contact Druva Support.
The following table lists the software prerequisites to install inSync Storage Node.
|Operating system|| |
|Web browser|| |
The following table lists the other requirements to install inSync inSync Storage Node.
|Open port numbers|| |
This port is used to communicate with the inSync Master. By default, inSync Master uses the following ports:
|IP address or FQDN||The WAN IP address or FQDN for backing up data over WAN. You can configure the IP address by using the inSync Master Management Console.|