Upgrade prerequisites for inSync Storage Node
inSync On-premise 5.4 Administrator Guide
On-premise Editions:
Private Cloud
Enterprise
Professional



Hardware prerequisites
The following table lists the hardware prerequisites to install inSync Master.
Hardware | Minimum Requirement | |||||
---|---|---|---|---|---|---|
CPU | 64-bit, quad core processor | |||||
RAM | 8 GB RAM for up to 1 TB of storage. If you have storage above 1 TB, we recommend that you add 1 GB RAM per additional TB of storage. | |||||
Disk space required for logs inSync Enterprise or inSync Professional edition | 100 Users | 500 Users | 1,000 Users | 2,000 Users | 5,000 Users | |
120 GB | 140 GB | 160 GB | 200 GB | 250 GB | ||
Disk space required for logs inSync Private Cloud edition | 1,000 Users | 5,000 Users | 10,000 Users | 25,000 Users | 50,000 Users | 100,000 Users |
175 GB | 275 GB | 400 GB | 600 GB | 900 GB | 1500 GB |
Note: The Hardware prerequisites table lists approximate numbers, which are dependent on various factors. To know the exact hardware prerequisites for your enterprise, contact Druva Support.
Software prerequisites
The following table lists the software prerequisites to install inSync Master.
Software | Minimum Requirement |
---|---|
Operating system | For inSync Private Cloud
For inSync Enterprise, inSync Professional
|
Web browser |
|
Other prerequisites
The following table lists the other requirements to install inSync Master.
Requirement | Description |
---|---|
Open port numbers | This port is used to communicate with the inSync Master. By default, inSync Master uses the following ports:
Note: Ensure that these ports remain free. If you choose to configure ports other than the default ports, ensure that those ports remain free. |
IP address or FQDN | The WAN IP address or FQDN for backing up data over WAN. You can configure the IP address by using the inSync Master Management Console. |