Skip to main content

 

Druva Documentation

Configure public gateway IPs

inSync Cloud Editions: File:/tick.png Elite Plus File:/tick.png Elite File:/cross.png Enterprise File:/cross.png Business

Overview

As the first step towards implementing Geofencing policy, you must define the public gateway IPs through which inSync users and administrators can access inSync. You can provide a single IP address, a range of IP addresses, or multiple ranges of IP addresses that define your corporate network.

Note: With this configuration, inSync administrators and users can access inSync only when they connect their devices through the specified IP addresses.

Before you begin

You must login as Cloud Admin on the inSync Master Management Console.

Procedure

To configure Geofencing public gateway IPs

  1. On the inSync Master Management Console bar, click 2.png > Settings.
  2. Click the Network tab.
  3. In the Geofencing area, click Edit.
    Geofencing settings dialog box appears on the page.
  4. In the Public Gateway IPs box, type the public IPs of your corporate network.
    You can specify the IP addresses in the following formats,
    IP Address Example
    Single IP address
    192.0.2.0
    
    Range of IP address, separated by hyphen (-).
    192.0.2.0 - 192.0.3.255
    
    Multiple range of IP address, separated by comma (,).
    192.0.2.0 - 192.0.3.255, 192.0.7.0,
    192.100.0.0 - 192.100.0.255
    
    Note
    • You must specify your Public Gateway IPs only, that are provided by your Internet Service Provider.
    • inSync supports only IPv4 addresses currently.
    • Specified IP addresses and the IP address range is validated for required format and accurateness.
  5. (Optional) If you want to enable the Geofencing policy for all inSync administrators in your organization, select the Allow admin access to inSync through Public Gateway IPs only check box. For more information, see Enable Geofencing policy for inSync administrators.
  6. Click Save.
  • Was this article helpful?